Wednesday, April 17, 2013
EDELBROCK small Block Chevy engine adapter boards convert the applications to the LS1 installation instructions
Pre-installation procedure for General Motors vehicles, the engine and featuring many different combinations. This section is intended to ensure that the correct components are in place before installation. If the vehicle is currently on the small block Chevrolet V8, engine isolator for the current application processing with an Edelbrock adapter plates. See the next page for further notes various applications. ENTERPRISE applications: 1964-1967: vehicles, which will be converted into a six-cylinder engine used in the Chevrolet engine or frame stands on 283 to 327 of the salvage yard or reproduction, such as vendors and Yearone OPGI; engine isolators may be the OEM rubber parts supplier, or polyurethane-type security mounts energy suspension: # 3.1114 (galvanized) or # 3.1115 (chrome). 1964 – 1967 applications require, to put it mildly, pass the engine frame stand mounting holes, the numbers 1 and 2. Figure 1 figure 2 – 1968-1972: 1968-1972 Chevrolet used two different types of frame standing on the matching engine isolators. One is 307 (and already in 1968, 327 of the 1980's), while type 2 includes all of the engines later in 1968 327 1980's through 454, which covers all engine sizes in between. If you have received a second vehicle frame stands, as described below to identify the installed system: a measure of engine isolator, where the engine mounting bolt goes inside the ears of the dimension is 2 5/8? for 307 cid (Figure 3) and 2 3/8? for larger-sized engine (fig. 4). The frame stands 454 late 327,350 there is also a reproduction from suppliers such as engine and Yearone, OPGI separators can be the OEM rubber parts supplier, or polyurethane suspension mounts on the security of energy: part # 3.1114 (galvanized) # 3.1115 (chrome) 307, part # 3.1117 (galvanized) or # 3.1118 (chrome) late in 327 454. Photo 3 (307) Figure 4 (350, etc) in the F-BODY and X-BODY applications: 1967-1969 F-body and 1968-1974 X-vehicles, which will be converted to a six-cylinder engine or the Chevrolet engine requires delimiters, which are responsible for the engine in the frame of the stand. There are a variety of styles depending on the engine size and model year, so your engine and frame of the stands, which are available from suppliers such as the reproduction of the classic industrial and Yearone. Engine isolators may be the OEM rubber parts supplier, or polyurethane-type security mounts on the suspension of energy. There are two types of engine degreasers; to identify them, measure the distance between engine bracket bolt, tab, if it is 2-5/8? use energy # 3.1114 (galvanized) # 3.1115 (chrome), if the distance is 2-3/8? use # 3.1117 (galvanized) # 3.1118 (chrome).
No comments:
Post a Comment