Monday, April 15, 2013
2005 Toyota Prius CAN View the module installation guide
I'm in seat covers the Prius, which has a flap that extends from the back seat to the attention of the Velcro straps. This crowds the CAN-view pane, if it is placed on top of the Nav-box installation instructions such as the following: I decided to put the CAN-view from the front of the Nav box attached to the box with Velcro (the only prickly part) on the mat. This shows that the Court leaned the back room to get to the plugs on the Nav box, and more space below the dash OBD cable. This shows how easy it is for now, sitting, leaning back to get the cables in front of the Nav box. The large white plug can take advantage of the gray wire is only less than blue. It can pull out other wires enough to attach to the faucet. The small white plug for the left of the large white plug is attached to the CAN-which is removed in the view box. (This is the MFD to the Nav box, which comes with the MFD link may appear.) Then you CAN View a small white plug of the cable is plugged into the Nav-plug, which was spun off from the Nav box. (MFD-is being channelled through the contacts CAN View and then back to the Nav-box.)
No comments:
Post a Comment