Monday, April 15, 2013
1993 BMW 325i (E36) removing and installing/replacing the heater and air conditioning fan (M50, S50, M52)
Air conditioning, notes removing and installing/replacing the heater and air conditioning fan (M50, S50, M52) * other 2-door model: remove the console from the windscreen-wiper system. * The position of the windscreen wiper, left, vertically. * Pulls out a slab, and pry off the grill. Zoom Zoom Print print the size dimensioned * remove the screws for the cable channel. * Remove the screws on the right side, and take out the holder. * Rotate the left screw. * Pull the air collector upward direction. Note: the Air collector is hard to pull off. The M50, M52 Unclip the covers. Remove the bolts. Remove the cover on the injection valve plate. * Unclip the covers and remove the screws. * Remove the cover * to open clips and take the blower. * Unplug the connector. * Remove the clips and lift the left upper part of the blower. Note: the air conditioning system is installed. Pictured air conditioning device removed.
No comments:
Post a Comment